TCL Roku TV Black Screen – How to Fix it : Solved Answer
If you power on your TCL TV but you do not see the menu options, or any video display – just a black, blank screen, and possibly no audio as well; try the recommended steps below to resolve the issue.
Check if the status LED, in front of your TV is ON.
When the TV is off or in stand-by mode the LED at the base of your TV should be solid white. When the TV is on it should be either off or blinking. To confirm, point the TCL remote towards the TV and press any button. You should see the LED blink every time your press the remote. If you see the LED blink while pressing a button on the remote, proceed with Step #2. If not it is possible your TV is not powered on or not responding to your remote.
For remote troubleshooting click here. If there is no indication that the TV is receiving power check that the power cord is firmly plugged into the back of the TV. Plug the other end to a know good outlet. Bypass any power strips for troubleshooting purposes.
Also Read : Vizio TV Light Blinking Problem
Verify the cable connections.
Make sure all external devices plugged into the TV are properly connected to the appropriate port, and are powered on. If necessary, unplug then reconnect the cables to the corresponding ports.
Restart the TV.
Press the power button on your TV. The location of the power button on most models in underneath TCL logo on the bottom of the TV or behind the TV towards the right edge. Please consult your user’s manual for the exact location. Unplug the TV from the power outlet. After 30 seconds, plug the TV back.
Factory reset the TV.
Click here to view steps on how to reset the TV if you still cannot view the menu options.
Contact Support.
If after performing the factory reset the display is still blank contact TCL Support for further troubleshooting.
My TCL Roku TV Remote is NOT Working
Depending on which TCL Roku TV you are using, you will have one of the following remotes. Select the image of your remote:
*Note: If your remote control has numbers or does not look like the images below, click here.
TIP: Check out the free Roku Mobile App for tablets and smartphones. Makes it easy to manage and access many features of your TCL Roku TV.
Standard IR remotes
Standard IR remotes use an invisible Infra-Red light to transmit remote key selections. To ensure IR remotes are operating reliably, they must be pointed directly at the front of your TCL Roku TV. To resolve issues with your standard IR remote, try the following:
Verify that there is a clear path between your TV and remote. Make sure that there are no obstructions between your TCL remote and the remote sensor located in front of the TV. For example: If you have a sound bar, confirm that it is not blocking the TV sensor.
Aim the remote directly at the TV. Make sure you are pointing the remote directly at the TV or at an optimal distance.
Try reinstalling the batteries. If the remote is still unresponsive or intermittently responding, it is possible the batteries were installed incorrectly. Try removing the batteries from the remote and re-inserting them.
If there is no improvement after reseating the batteries, try replacing them.
Infrared Emitter Test. For this procedure, you will need a smart phone, or a digital camera with a live display. Note: Some cameras will show the Infrared (IR) signal better than others. Also, it is recommended to conduct this test in a darkened room.
- Point your smartphone or digital camera towards the tip of the TCL remote.
- Look into the camera as if you are taking a picture while pressing any button on the remote
- You should see a flashing purple light as you press and hold the button. Refer to sample images below
As you can see, the IR emitter is more visible in a darker room and quite hard to see in a brightly lit room. Note: Both photos show the same remote being tested.
If no light is seen from the IR emitter, then it is likely that the remote is defective. If the remote is emitting an IR signal, but the TV still does not turn on or respond, confirm that nothing is blocking the TV’s IR receiver (located underneath the TCL logo). If there’s clear line of sight, and the TV still does not turn on, then the issue could lie with the IR receiver on the TV.
Enhanced remotes
The enhanced remotes connect over your wireless network and do not need to be pointed directly at your TCL Roku TV. This easy-to-use remote needs to be paired during initial TV setup. To resolve any issues with your enhanced remote, refer to the recommended steps below:
Try replacing the batteries
- Open the battery compartment and remove the batteries from the remote.
- Install new fresh batteries of same type in your TCL ROKU TV remote control, observing the proper orientation as indicated in the battery compartment.
Try restarting your TCL Roku TV and enhanced remote
- Open the battery compartment and remove the batteries from the remote.
- Restart your TCL Roku TV
- When you see the home screen on your TV, reinsert the batteries.
Try re-pairing the enhanced remote and your TCL Roku TV
- Open the battery compartment to locate the pairing button – as shown in above image.
- Press and hold the pairing button for three (3) seconds or until the pairing light starts flashing. If the light does not flash, try again. If the light still does not flash, then you will need to replace your batteries. After replacing the batteries, repeat step 1.
- Restart your TCL Roku TV
- Wait for 30 seconds while the remote establishes a connection with your TV.
- The remote pairing dialog should appear on your TV screen.
- Once TV and enhanced remote are successfully paired, the TV will show the battery status of the enhanced remote