Commonwealth Bank Activate Card : How do I Activate my CommBank card?
To activate your new Commonwealth Bank card, login into my.commbank.com.au/netbank/ and Enter the last 4 digits of your card > then click Check. Click Get NetCode. Enter your NetCode > then click Activate.
How do I activate my CommBank card?
CommBank app
1. Log on to the CommBank app
2. Tap Cards > then swipe across to find the right card
3. Tap Activate card
NetBank
1. Register for NetCode, if you’re not already
2. Log on to NetBank > then go to Settings
3. Under Security select Card activation.
4. Enter the last 4 digits of your card > then click Check.
5. Enter and confirm your PIN > then click Set PIN.
6. Click Get NetCode.
7. Enter your NetCode > then click Activate.
Keep in mind
- To activate your card online, you need to be registered for NetBank or the CommBank app
- Not all replacement cards need to be activated. Tap cards on the CommBank app home screen to see your active cards
- A primary cardholder needs to activate both their own card and the secondary cardholder’s
| Article Name | Commonwealth Bank Activate Card |
| Commonwealth Card Activation Link | my.commbank.com.au/netbank/ |
| Activate Commonwealth Card | Click Here |
| Official Website | www.commbank.com.au |
Logging on
Go to CommBiz , enter your log on ID and temporary password.
Next, you’ll be guided through a few quick steps to set up your CommBiz profile.
1. Change your password and enter your email address.
2. Set four security questions – Select a question, populate your answer and click Add. Once you’ve added four questions, click Next.
You’ll need to answer your security questions if you forget your password or if you contact the CommBiz helpdesk.
3. If you’ve received a security token, click Activate now and follow the prompts . Otherwise click Next to skip this step.
4. Click Change to choose a new log on ID that’s easier to remember or click Finish to skip this step.
Activating your eToken
Two-factor authentication is essential for access to sensitive areas of CommBiz, such as editing a Service or authorising a transaction.
CommBiz eToken generates a one-time password for you to enter in addition to your log on ID and password. You’ll receive an email or your Service Administrator will let you know if you need eToken.
Before you can download the CommBiz app and activate your eToken, you need to verify your identity with the Bank.
1. Configure the Date and time settings on your mobile device to Automatic. You can usually do this by selecting ‘Settings’, ‘General’, ‘Date and time’ on iOS and Android phones.
2. Download the CommBiz app from the App Store (iOS) or Play Store (Android).
3. Open the app and follow the prompts to register the app and Activate CommBiz eToken now (step 4). You’ll need to enter your four digit PIN to Generate token password each time you need one.
If you don’t see step 4, and haven’t activated eToken on any other device, eToken is not set up on your CommBiz Service. You may receive a security token in the mail, or your Service Administrator can call the CommBiz Helpdesk on 13 2339 to set up eToken on your Service.
Activating your security token
To access secure features on CommBiz, like making changes to a Service or authorising a transaction, two factor-authentication is required.
A CommBiz security token generates a one-time password for you to enter in addition to your log on ID and password
1. Log on to My Security Centre using your CommBiz credentials..
2. Click Activate token.
3. Enter the 10-digit serial number on the back of your token
4. Click Activate token.
Note: You can only have an eToken or a physical token at one time.
Activating your NetLock USB device
Your NetLock USB device will secure your connection to CommBiz every time you log on. It’s specific to you and cannot be shared with others.
NetLock can be used on Microsoft and Mac operating systems only.
1. Write down the serial number on the back of your NetLock USB device and insert your device into a USB port on your computer.
2. Find and open the NetLock drive using File Explorer (Microsoft) or Finder (Apple). Double click the CommBank logo (NetLock.exe, NetLock, NetLock.app).
3. Log on to My Security Centre using your CommBiz credentials.
4. Enter your 9 digit serial number and click Activate. Log on to CommBiz.
